- Home
- Fittings for commercial vehicles
- Volkswagen
- Crafter 2017
- Flooring and Panelling
Panelling and floors for Volkswagen crafter 2017
The new Crafter 2017, the large-sized work van in the Volkswagen range of commercial vehicles, was named International Van of the Year 2017 even before it was launched in the market. Its new design, the over 15 driver assistance systems, and its six different drive systems are among its biggest strengths.
Available at dealers since a few months, there are already a number of new 2017 VW Crafters fitted out with Store Van interior panelling products. Strengthen your new vehicle’s interior with phenolic marine plywood or aluminium diamond plate flooring, polypropylene side panelling, perforated steel panels, wheel covers, and partitions. All Store Van interior panelling products are lightweight, robust and pre-formed, therefore, ready for fast and easy installation.
PANELLING AND FLOORS FOR VOLKSWAGEN CRAFTER:
- Flooring in marine plywood, 9 mm, with phenol finish. Floor panels come with polypropylene recessed eyelet fasteners, screws and washers to secure them to the vehicle’s original fixtures. Innovative flexible joining system, patented
- Lightweight and sturdy protective linings made from 4mm-thick polypropylene honeycomb panels
- Rear door and side door panelling
INTERIOR PANELLING AND COVERINGS VOLKSWAGEN CRAFTER:
- HONEYCOMB
Polypropylene linings for:
– LH sidewall
– RH sidewall and sliding door
Polypropylene linings for:
– lower part of rear hinged doors
Polypropylene linings for:
– upper part of rear hinged doors
TABLE OF ITEM CODES ACCORDING TO MODELS:
| VEHICLE | FLOORING | BULKHEAD | ||
|---|---|---|---|---|
| D (9 mm) | F (1180x375x12 mm) | |||
| ITEM NO. | ITEM NO. | |||
| L1 H1A | F22 WF FI10D1 B0 1S 11,95 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
|
L1 H1A Methane gas |
F22 WF FI10D1 B1 1S 12,55 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
| L1 H1B | F22 WF FI10D2 B0 1S 11,94 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
- ALUMINIUM PANEL
Aluminium side panelling for:
– LH sidewall
– RH sidewall and sliding door
Aluminium side panelling for:
– lower part of rear hinged doors
Aluminium side panelling for:
– upper part of rear hinged doors
TABLE OF ITEM CODES ACCORDING TO MODELS:
| VEHICLE | FLOORING | BULKHEAD | ||
|---|---|---|---|---|
| D (9 mm) | F (1180x375x12 mm) | |||
| ITEM NO. | ITEM NO. | |||
| L1 H1A | F22 WF FI10D1 B0 1S 11,95 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
|
L1 H1A Methane gas |
F22 WF FI10D1 B1 1S 12,55 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
| L1 H1B | F22 WF FI10D2 B0 1S 11,94 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
VOLKSWAGEN CRAFTER FLOORING SOLUTIONS:
- WOOD FLOOR
Wood flooring, 9/12 mm thickness, coated with phenolic film and shaped to fit around the vehicle’s original anchor points.
12 mm thick wooden bulkhead panel with phenolic coating
TABLE OF ITEM CODES ACCORDING TO MODELS:
| VEHICLE | FLOORING | BULKHEAD | ||
|---|---|---|---|---|
| D (9 mm) | F (1180x375x12 mm) | |||
| ITEM NO. | ITEM NO. | |||
| L1 H1A | F22 WF FI10D1 B0 1S 11,95 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
|
L1 H1A Methane gas |
F22 WF FI10D1 B1 1S 12,55 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
| L1 H1B | F22 WF FI10D2 B0 1S 11,94 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
Flooring for right side door vehicle with metal sheet sidewalls.
Wood flooring with TÜV-certified friction coefficient
- ALUMINIUM FLOOR
Aluminium flooring, 9 mm thickness, coated with aluminium diamond plate 2 mm thick and shaped to fit around the vehicle’s original anchor points
TABLE OF ITEM CODES ACCORDING TO MODELS:
| VEHICLE | FLOORING | BULKHEAD | ||
|---|---|---|---|---|
| D (9 mm) | F (1180x375x12 mm) | |||
| ITEM NO. | ITEM NO. | |||
| L1 H1A | F22 WF FI10D1 B0 1S 11,95 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
|
L1 H1A Methane gas |
F22 WF FI10D1 B1 1S 12,55 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
| L1 H1B | F22 WF FI10D2 B0 1S 11,94 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
Flooring for right side door vehicle with metal sheet sidewalls.
- SAFETY FLOOR
9 mm phenol faced plywood flooring with additional lashing points
12 mm thick wooden bulkhead panel with phenolic coating
TABLE OF ITEM CODES ACCORDING TO MODELS:
| VEHICLE | FLOORING | BULKHEAD | ||
|---|---|---|---|---|
| D (9 mm) | F (1180x375x12 mm) | |||
| ITEM NO. | ITEM NO. | |||
| L1 H1A | F22 WF FI10D1 B0 1S 11,95 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
|
L1 H1A Methane gas |
F22 WF FI10D1 B1 1S 12,55 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
| L1 H1B | F22 WF FI10D2 B0 1S 11,94 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
Flooring for right side door vehicle with metal sheet sidewalls.
Wood flooring with TÜV-certified friction coefficient
Horizontal aluminium bar
Horizontal aluminium bar
Horizontal aluminium bar
Telescopic load restraining bar
Plastic end cap for bar
Ring stud fitting
Load belt with clamp
Load restraining belt with ratchet
Load restraining belt with ratchet
CALL NOW
for any information you need
DOWNLOAD
CRAFTER CATALOGUE
- WOULD YOU LIKE TO KNOW MORE?
Fill out the following fields to receive additional information. A person from our team will get in touch with you soon (*required fields):