Flooring and Panelling for Ford Transit

To a varying extent, all commercial vehicles are affected by wear of the sheet steel of the cargo area due to the passage of time, damp, liquid spills, rust or knocks caused by the sudden shifting of imperfectly secured heavy loads, which crash into the bodywork. To protect a van against dents or attack by the weather and chemicals, the technical staff of Store Van authorised garages recommend the installation of flooring and panelling, an effective, tough solution. Start equipping your mobile office by fitting bodywork linings: for Ford Transits, we offer polypropylene side panellings and wood floorings 12 mm thick with multi-coat phenol film finish, shaped to fit around the vehicle’s original load anchor fixtures.

INTERIOR PANELLING AND COVERINGS FOR TRANSIT:

Polypropylene linings for:
– LH sidewall
– RH sidewall and sliding door

Polypropylene linings for:
– upper part of rear hinged doors

TABLE OF ITEM CODES ACCORDING TO MODELS:

VEHICLE	FLOORING	BULKHEAD
	D (9 mm)	F (1180x375x12 mm)
	ITEM NO.	ITEM NO.
L1 H1A	F22 WF FI10D1 B0 1S 11,95 kg	F22 WF FIWBT1 B0 1S 3,40 kg
L1 H1A Methane gas	F22 WF FI10D1 B1 1S 12,55 kg	F22 WF FIWBT1 B0 1S 3,40 kg
L1 H1B	F22 WF FI10D2 B0 1S 11,94 kg	F22 WF FIWBT1 B0 1S 3,40 kg

Aluminium side panelling for:
– LH sidewall
– RH sidewall and sliding door

Aluminium side panelling for:
– lower part of rear hinged doors

Aluminium side panelling for:
– upper part of rear hinged doors

TABLE OF ITEM CODES ACCORDING TO MODELS:

VEHICLE	FLOORING	BULKHEAD
	D (9 mm)	F (1180x375x12 mm)
	ITEM NO.	ITEM NO.
L1 H1A	F22 WF FI10D1 B0 1S 11,95 kg	F22 WF FIWBT1 B0 1S 3,40 kg
L1 H1A Methane gas	F22 WF FI10D1 B1 1S 12,55 kg	F22 WF FIWBT1 B0 1S 3,40 kg
L1 H1B	F22 WF FI10D2 B0 1S 11,94 kg	F22 WF FIWBT1 B0 1S 3,40 kg

TRANSIT FLOORING SOLUTIONS:

9/12 mm thick wooden flooring with phenolic coating set for the vehicle original anchoring system

12 mm thick wooden bulkhead panel with phenolic coating

Flooring for right side door vehicle with metal sheet sidewalls.

TABLE OF ITEM CODES ACCORDING TO MODELS:

VEHICLE	FLOORING	BULKHEAD
	D (9 mm)	F (1180x375x12 mm)
	ITEM NO.	ITEM NO.
L1 H1A	F22 WF FI10D1 B0 1S 11,95 kg	F22 WF FIWBT1 B0 1S 3,40 kg
L1 H1A Methane gas	F22 WF FI10D1 B1 1S 12,55 kg	F22 WF FIWBT1 B0 1S 3,40 kg
L1 H1B	F22 WF FI10D2 B0 1S 11,94 kg	F22 WF FIWBT1 B0 1S 3,40 kg

Flooring for right side door vehicle with metal sheet sidewalls.
^A Front-wheel drive, single wheels
^B Rear-wheel drive 4WD, single wheels
^C Rear-wheel drive, twin wheels

Aluminium flooring, 9 mm thickness, coated with aluminium diamond plate 2 mm thick and shaped to fit around the vehicle’s original anchor points

TABLE OF ITEM CODES ACCORDING TO MODELS:

VEHICLE	FLOORING	BULKHEAD
	D (9 mm)	F (1180x375x12 mm)
	ITEM NO.	ITEM NO.
L1 H1A	F22 WF FI10D1 B0 1S 11,95 kg	F22 WF FIWBT1 B0 1S 3,40 kg
L1 H1A Methane gas	F22 WF FI10D1 B1 1S 12,55 kg	F22 WF FIWBT1 B0 1S 3,40 kg
L1 H1B	F22 WF FI10D2 B0 1S 11,94 kg	F22 WF FIWBT1 B0 1S 3,40 kg

Flooring for right side door vehicle with metal sheet sidewalls.
^A Front-wheel drive, single wheels
^B Rear-wheel drive 4WD, single wheels
^C Rear-wheel drive, twin wheels

9 mm phenol faced plywood flooring with additional lashing points

12 mm thick wooden bulkhead panel with phenolic coating

TABLE OF ITEM CODES ACCORDING TO MODELS:

VEHICLE	FLOORING	BULKHEAD
	D (9 mm)	F (1180x375x12 mm)
	ITEM NO.	ITEM NO.
L1 H1A	F22 WF FI10D1 B0 1S 11,95 kg	F22 WF FIWBT1 B0 1S 3,40 kg
L1 H1A Methane gas	F22 WF FI10D1 B1 1S 12,55 kg	F22 WF FIWBT1 B0 1S 3,40 kg
L1 H1B	F22 WF FI10D2 B0 1S 11,94 kg	F22 WF FIWBT1 B0 1S 3,40 kg

Flooring for right side door vehicle with metal sheet sidewalls.
^A Front-wheel drive, single wheels
^B Rear-wheel drive 4WD, single wheels
^C Rear-wheel drive, twin wheels