- Home
- Citroën
- Berlingo
- Flooring and Panelling
Flooring and Panelling for Citroën Berlingo
Available in lengths L1 and L2, the Citroën Berlingo has an ideal load surface for the fitting of a Store Van mobile office. The installation process starts with the protective linings for the sheet steel of the cargo area interior, since sooner or later all commercial vehicles have to deal with the wear and tear, scratches and dents inevitably caused to the bodywork by the transportation of loads, especially if no suitable securing system is used. Choose to protect your Citroën Berlingo with the marine plywood flooring 9 mm thick with multi-coat phenol film finish, shaped to fit around the vehicle’s original load anchoring fixtures, and the polypropylene honeycomb side panellings. Also choose to secure the load with the “Load Securing” system, a highly effective system of telescopic posts, load restraining bars, straps and rings.
INTERIOR PANELLING AND COVERINGS FOR BERLINGO:
- HONEYCOMB
Aluminium side panelling for
– LH sidewall
– RH sidewall and sliding door
Polypropylene linings for
– upper part of rear hinged doors
TABLE OF ITEM CODES ACCORDING TO MODELS:
| VEHICLE | LINING | |||
|---|---|---|---|---|
| A | B | |||
| ITEM NO. | ITEM NO. | |||
| L1 H1 | F22 HP PA10H1 A1 01 3,35 kg | F22 HP PADRH1 A0 01 0,97 kg | ||
| L2 H1 | FF22 HP PA20H1 A1 01 3,97 kg | F22 HP PADRH1 A0 01 0,97 kg | ||
Linings for right side door vehicle with metal sheet sidewalls.
- ALUMINIUM PANEL
Aluminium side panelling for
– LH sidewall
– RH sidewall and sliding door
Aluminium side panelling for
– upper part of rear hinged doors
TABLE OF ITEM CODES ACCORDING TO MODELS:
| VEHICLE | LINING | |||
|---|---|---|---|---|
| A | B | |||
| ITEM NO. | ITEM NO. | |||
| L1 H1 | F22 HP PA10H1 A1 01 3,35 kg | F22 HP PADRH1 A0 01 0,97 kg | ||
| L2 H1 | FF22 HP PA20H1 A1 01 3,97 kg | F22 HP PADRH1 A0 01 0,97 kg | ||
Flooring solutions for Berlingo vans:
- WOOD FLOOR
9 mm thick wooden flooring with phenolic coating set for the vehicle original anchoring system
TABLE OF ITEM CODES ACCORDING TO MODELS:
| VEHICLE | FLOORING | ||
|---|---|---|---|
| D (9 mm) | |||
| ITEM NO. | |||
| L1 | F22 WF PA10D1 B1 1S 14,64 kg | ||
| L2 | F22 WF PA20D1 B1 1S 17,83 kg | ||
Flooring for right side door vehicle with metal sheet sidewalls.
Wood flooring with TÜV-certified friction coefficient
- ALUMINIUM FLOOR
Aluminium flooring, 9 mm thickness, coated with aluminium diamond plate 2 mm thick and shaped to fit around the vehicle’s original anchor points
TABLE OF ITEM CODES ACCORDING TO MODELS:
| VEHICLE | FLOORING | ||
|---|---|---|---|
| D (9 mm) | |||
| ITEM NO. | |||
| L1 | F22 WF PA10D1 B1 1S 14,64 kg | ||
| L2 | F22 WF PA20D1 B1 1S 17,83 kg | ||
Flooring for right side door vehicle with metal sheet sidewalls.
- SAFETY FLOOR
TABLE OF ITEM CODES ACCORDING TO MODELS:
| VEHICLE | FLOORING | BULKHEAD | ||
|---|---|---|---|---|
| D (9 mm) | F (1180x375x12 mm) | |||
| ITEM NO. | ITEM NO. | |||
| L1 H1A | F22 WF FI10D1 B0 1S 11,95 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
|
L1 H1A Methane gas |
F22 WF FI10D1 B1 1S 12,55 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
| L1 H1B | F22 WF FI10D2 B0 1S 11,94 kg | F22 WF FIWBT1 B0 1S 3,40 kg | ||
Flooring for right side door vehicle with metal sheet sidewalls.
Wood flooring with TÜV-certified friction coefficient
Horizontal aluminium bar
Horizontal aluminium bar
Horizontal aluminium bar
Telescopic load restraining bar
Plastic end cap for bar
Ring stud fitting
Load belt with clamp
Load restraining belt with ratchet
Load restraining belt with ratchet
CALL NOW
for any information you need
DOWNLOAD
CATALOGUE PARTNER
- WOULD YOU LIKE TO KNOW MORE?
Fill out the following fields to receive additional information. A person from our team will get in touch with you soon (*required fields):